BabySense Max View Manual Del Usuario página 11

ENG
4.3 VOX Mode
When using the VOX function, the sound and video transmission will stop (standby mode) if the Baby Unit does not register any sound within 30
seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the set sensitivity level, it will automatically start
transmitting the signal (sound and video) to the Parent Unit and the LCD screen will turn on.
To change the VOX Level please follow the instructions below:
1. Press to access the menu, choose and press
2. Navigate with to select the desired vox level.
VOX - LOW - Low sensitivity level - higher sound level is required to reactivate the transmission
VOX – MEDIUM - Medium sensitivity level - medium sound level is required to reactivate the transmission
VOX - HIGH - High sensitivity level - low sound level is required to reactivate the transmission
VOX - OFF - Constant transmission – no standby mode.
NOTE: To resume the video and audio signal manually on your parent unit when VOX function is on, briefly press any key on your Parent Unit.
NOTE: VOX default setting is OFF.
When VOX Mode is active, sound detected from either camera will wake the display and show the respective camera.
11