BabySense Max View Manual Del Usuario página 19

ENG
4.16 Switching between the paired Baby Units (Cameras)
• To switch between paired cameras – briefly press the CAMERA SWITCH button (10) on your Parent Unit.
NOTE: This function is only available when two or more cameras are paired.
4.17 SCAN Mode - Automatic switching between the paired Baby Units (Cameras)
You can set the SCAN (loop) mode and each paired Baby Unit will be displayed on the screen for 15-20 seconds and then the screen will
automatically change to the next paired Baby Unit.
• Press and hold the CAMERA SWITCH button (10) to activate the automatic SCAN mode. A "SCAN MODE ON" message will appear on the screen and
a loop sign will appear next to the camera number on the top of LCD screen.
• Press the CAMERA SWITCH button (10) to deactivate the Scan mode
4.18 Split Screen Setting
You can see images from two Baby Units side by side on your Parent Unit by enabling the SPLIT SCREEN setting.
1. Press Split Screen Button (11) to activate Split Screen Mode
2. Press Split Screen Button (11) to deactivate Split Screen Mode
NOTE: This function is only available when two or more cameras are paired.
NOTE: If 4 cameras are paired and Split-Screen Mode is selected then cameras 1 and 2 will be seen in one Split-Screen view and cameras 3 and 4 will
be seen in the next Split-Screen view.
4.19 Talk to Baby
• Press and hold the Talk Back Button (12) and speak into the Microphone (13) to talk to your baby or partner in the baby's room via Baby Unit.
• Release the button when you are finished talking.
NOTE: While the "Talk to Baby" function is in use, there is no possibility to hear the sounds from the Baby Unit. Releasing the talk button allows one to
hear the sounds from the baby's room again.
19