Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
NOTE: The monitor features a built-in automatic temperature alert. The monitor will alert (visual indication) when the temperature in baby's room is
too high (90°F and higher) or too low (55°F and lower).
NOTE: Make sure the temperature sensor is not positioned too close to the camera body as it may affect the correct temperature reading. It is
recommended to stretch out the sensor, so it is as far away from the camera body as possible. Also, it is recommended to place the camera in an
area where there is good air circulation and not in a closed cornered area where the temperature tends to be higher.
4.8 Temperature Alert Setting
This function is to alert if the temperature in baby's room is too low or too high.
NOTE: The temperature alert default setting is: <15 °C/59 °F and >31 °C/89 °F.
To change the temperature alert levels, please follow the below instructions:
1. Press to access the menu, choose
and press
2. Navigate with
to select
and press
3. Navigate with
to select the desired option
and temperature and press
4. Press to exit the menu
NOTE: If the OFF option is selected for Alerts then, in case of high/low temp warning, there will be no acoustic notification heard and only a visual
notification seen.
14
Publicidad
