2. Product Overview
EN
Accessories
Extension Nozzle
Battery Charger
Scooter
Handlebar
Brake Lever
Headlight
Stem
Quick Release Lever
Safety Lock
Front Reflector
Charging Port
Front Fork
Front Mudguard
Front Rocker Arm
(Built-in)
The illustrations in this manual are for reference only, the actual appearance shall be subject to actual product.
004
User Manual
Screw x 5
Allen Key
Bell Lever
Scooter Bell
Power Button
Accelerator
Dashboard
Buckle
Deck
Hook
Rear Mudguard
Tail Light & Rear Reflector
Wheel Motor
Disc Brake
Rear Rocker Arm (Built-in)
Kickstand
Battery Compartment
Side Reflector
2. Product Overview
Power Button
Press the button
to 3 seconds to turn the scooter off. When the scooter is on, press once
to turn on/off the headlight and tail light, and press twice to change
riding modes.
Dashboard
① Riding Modes:
the taillight will blink red when this mode is enabled. D is for standard mode.
①
S is for sport mode.
② Speedometer: It displays the current speed when the scooter is working.
When the scooter has an issue, it displays an error code. When the scooter is
②
charging, it displays the current battery level.
③
③ Cruise Control: The cruise control function is disabled by default and can be
④
enabled in the Mi Home/Xiaomi Home app.
④ Bluetooth: The Bluetooth icon is always on, indicating that the scooter has
⑤
⑥
been successfully connected to the mobile device.
⑦
⑤ Temperature Warning: If the battery temperature is too high or too low,
⑧
the thermometer icon will be on. Use or charge the scooter after its battery
temperature returns to the normal operating range.
⑨
⑥ Inflation: When the inflation icon is on, it means that it is time to maintain
the tires.
⑦ Error Notification: When the wrench icon displays red, it indicates that the
scooter has an error.
⑧ Battery Level: The battery power is indicated by 5 bars, each representing
approximately 20 % of a full battery.
⑨ Status Light
to turn the scooter on, and hold the button
for 2
is for walking mode, and its maximum speed is 6 km/h,
EN
005