Bushnell Discoverer 78-8970 Manual De Instrucciones página 16

m
uSINg DIScOverer FOr The FIrST TIme (continued)
To select the final mode press ENTER at the display:
SELECT MODE
56
TELESCOPE
The display reads something like:
RA18:53 DEC+38.7
AZ280 ALT+62 LYR
The TELESCOPE mode gives you dynamic real-time information
on your telescope's current position in terms of astronomical
coordinates. Play around with this mode by moving the telescope
around. Notice the three letter abbreviation in the lower right
portion of the display. This dynamically displays the current
CONSTELLATION that the telescope is pointing at. These names
are abbreviated in this mode. Definitions for the abbreviations will
be in the catalog index.
1
WINTER
SPRING