Candy CIB1637DC Manual De Instrucciones página 10

Cleanness and Maintenance
The surface of the induction hob may be easily cleaned in the following way:
Type of contam-
ination
Light
Rings and lime
scale
Sweetmeat, melted
aluminium or
plastics
NB: Disconnect the power supply before cleaning.
Failure Display and Inspection
If any abnormality occurs, the induction hob will automatically go into protective mode and display
one of the following codes:
F0/F1/F2
The above table shows how to assess and check common faults.
Do not dismantle the appliance yourself, otherwise you may damage the induction
hob.
Customer Care Service
If a fault should occur, before calling After Sales Service, please do the following:
-Check that the appliance is correctly plugged in
-Read the failure and display table above
If you are still unable to resolve the problem, switch off the appliance, do not try to dismantle it,
and call
After Sales Service.
Method of cleaning
Immerse in hot water and wipe dry
Apply white vinegar to the area, wipe with
a soft cloth or use a commercially
available product
Use a special scraper for ceramic glass
to remove residue (a silicon product is
best)
Fault Possible cause
Fan failure
Temperature
sensor failure
F3-F8
Abnormal voltage in
E1/E2
power supply
Abnormal
E3/E4
temperature
Poor heat radiation
E5/E6
in cooking zone
Cleaning materials
Cleaning sponge
Special adhesive for ceramic
glass
Special adhesive for ceramic
glass
Solutions
Contact the supplier
Contact the supplier
Check if power supply is
normal.
Power on after power supply
returns to normal.
Check the pan
Restart when cooking
zone cools down
10