Silvercrest SMA 500 F1 Instrucciones De Uso página 14

Storage
♦ Allow the appliance cool down completely before putting it into storage.
Wind the power cable around the cable retainer q in a clockwise
♦
direction. The arrows show you which direction to use for winding. Note
that the mains cable must be removed from the cable retainer in the
opposite direction to the arrow.
♦ Store the appliance in a clean and dry location.
Troubleshooting
Malfunction
The appliance is not
working.
The control lamp
5/6/7/8 flash-
es and the appliance
will not start.
Disposal
Disposal of the device
The adjacent symbol of a crossed-out wheelie bin means that this appliance
is subject to Directive 2012/19/EU. This directive states that this appliance
may not be disposed of in the normal household waste at the end of its
useful life, but should be handed in to specially set-up collection locations,
recycling depots or disposal companies.
The disposal is free of charge for the user. Protect the environ-
ment and dispose of this appliance properly.
Your local community or municipal authorities can provide information on
how to dispose of the worn-out product.
SMA 500 F1
Cause
The plug is not inserted into
a mains power socket.
The appliance is not
switched on.
The appliance is defective.
The 4 container is empty
and the boil-dry protection
device has been triggered.
The overheating protection
has been triggered.
Remedy
Check that the mains plug is
correctly inserted into the power
socket.
Switch the appliance on.
Contact the Customer Service
department.
Add cold milk and restart the
programme.
Allow the appliance to cool
down and replace the hot milk
with cold milk.
GB │ IE │
11 ■