Publicidad
Idiomas disponibles
Idiomas disponibles
c)
Keep the device in perfect technical condition. Before each use check for general damage and especially check for
cracked parts or elements and for any other conditions which may impact the safe operation of the device. If damage is
discovered, hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by qualified persons, only using original spare parts. This will ensure
safe use.
f)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not loosen any screws.
g)
Do not move, adjust or rotate the device in the course of work.
h)
Do not work on two workpieces at the same time.
i)
The device is not a toy. Cleaning and maintenance may not be carried out by children without supervision by an adult
person.
j)
It is forbidden to interfere with the structure of the device in order to change its parameters or construction.
k)
Keep the device away from sources of fire and heat.
l)
Use protective gloves to avoid being hurt by sharp edges.
m) Use the device to work elements of parameters conforming with the data given in the technical data table. Do not
exceed the permissible dimensions of the worked material.
n)
Long workpieces must be supported and set stably for working.
o)
Mount the device on a stable, dry and flat surface of a size that is adapted to the device and worked material overall
dimensions.
p)
The floor at the workstation should be anti-slip.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use of additional
elements protecting the operator, there is still a slight risk of accident or injury when using the device. Stay alert
and use common sense when using the device.
3. Use guidelines
The device is designed for the manual bending of metal pipes
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description
Publicidad
