Clothing
Use clothing that is suitable for the type of
work.
• Do not leave your hair hanging loose or wear
dangling jewellery.
• Do not wear loose pieces of clothing that
can get caught in the machine's moveable parts.
• Always use personal protection such as a dust mask,
safety goggles, rubber gloves, non-skid
footwear and
requires these.
Maintenance
• Do not use either the machine or its accessories
if these are broken, damaged or worn out.
• Keep the tool clean and the cutting accessories
sharp.
• Use spare parts that are original or recommended by
the seller.
• Check that the moveable parts are not jammed or
blocked before the machine is used.
• Remember to carefully tighten the rotary accessory.
Keep spectators at a distance
When you are working with the machine, keep hold
spectators at a distance from the work area.
Children in particular can unwittingly come into con-
tact with both cable and machine.
Specific safety measures
• Keep the cable away from the machine's
moveable parts when you are using the machine.
• Disconnect the machine from the mains when
you change accessories, rotate the machine head or
put the machine down.
• Never activate the shaft lock while the
multigrinder is turned on.
• The machine must not be exposed to heavy
loads at low speed.
safety clothing where the situation
10