Publicidad
Idiomas disponibles
Idiomas disponibles
KICKER KISL (optional)
Cut the looped red power cable located on the PXA harness and install a 40A fuse. Fuse installation should be
within 18" (45cm) of the battery and in-line with the harness' power cable, which is connected to your amplifi er.
If you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be
the last wire disconnected from the amplifi er--just the opposite as when you installed it. Use 8 gauge wire if the
power wire is greater than 10 feet in length; 10 gauge if less.
remote turn-on
≤24"
(60cm)
bare-metal
chassis ground
2015 PX 4-Chan Amplifier Rev F.indd 3
2015 PX 4-Chan Amplifier Rev F.indd 3
to amplifi er
from source unit high-level speaker outputs
insert power and
ground terminal
adapter
speaker outputs
+
-
≤18"
(45cm)
external fuse
(40A)
Model
PXA300.4
RCA inputs
(remove to use hi-level input)
12V
battery
bare-metal chassis ground
External Fuse
1 x 40 Ampere
3
11/4/2014 3:16:01 PM
11/4/2014 3:16:01 PM
Publicidad
