Jimmy BD7 Pro Manual Del Usuario página 6

Packing List
Anti-mite vacuum Cleaning
Adapter Battery pack HEPA filter User manual
cleaner brush
1 1 1 1 1 1
Battery pack removal and assembly
1
Press and hold the release latch of the battery
pack, and take out the battery pack in the
release latch
direction indicated by the arrow. Assemble battery
pack into mainbody in opposite sequence. (Figure
1)
Charging
Note:
1. When using this product for the first time, the battery power of the vacuum cleaner may not be full. Need to
use charger to fully charge the battery before using.
2. When using the anti-mite vacuum cleaner for the first three times, please charge up to 12 hour each time.
When the power of the vacuum cleaner is insufficient, please charge the vacuum cleaner in
time; When the voltage is too low, in order to protect the battery, it will automatically power off,
and the vacuum cleaner must be charged at this time. Plug the adapter plug into the AC power
socket to start charging. The LED screen of the display screen is "red" when the product is
charging.
When the power display icon on LED screen turns to "white", the vacuum cleaner has been fully
charged. Please pull the plug out of the AC socket in time.
Use of the Product
Dust level display
Power mode
UV model
Tap mode
Negative ions display
Vacuum mode
Brushroll blockage indicator Battery power display
4