Black and Decker CTO6301BJP Manual Del Usuario página 4

How to Use
This product is for household use only.
gEttiNg StaRtED
• Remove packing materials and any stickers. Peel off clear protective film from
control panel.
• Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all parts as instructed in CARe And CleAnIng.
• Select a location for the unit. leave some space between the back of the unit and
your wall to allow heat to flow without damaging cabinet and walls.
• Insert crumb tray underneath the bottom heating
elements.
• Untie the cord and unwind it.
• Plug unit into electrical outlet. 0 00 shows on the digital
display (C).
important: During the first few minutes of use, you may
notice smoke and a slight odor. this is normal and is not a
cause for concern.
C
6
CaUtiON
tHiS OVEN gEtS HOt.
WHEN iN USE, alWaYS USE OVEN
MittS OR POt HOlDERS WHEN
tOUCHiNg aNY OUtER OR iNNER
SURFaCE OF tHE OVEN.
HElPFUl iNFORMatiON aBOUt YOUR OVEN
• You can change the temperature from ˚F to ˚C by pressing the ▲ and ▼ buttons
simultaneously.
• For your convenience, the unit always remembers the last selected setting unless
unplugged. You can change this setting before the oven begins preheating or once
it has reached the preset temperature and time.
• You cannot change the temperature or time during the preheat cycle. once the
set temperature is reached, you can then change the temperature or time at any
time.
• If using convection bake, remember to lower the suggested temperature of a
recipe or package by 25˚F.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door.
always use oven mitt or pot holder.
SliDE RaCk POSitiONS
There are four positions for the slide rack (D). It can be inserted in either the upper
or lower slot. It can also be inverted for two additional positions.
Position 
Use upper slots along
oven walls. insert
rack using a rack-up
position.
Position 
Use upper slots along
oven walls. insert rack
using a rack-down
position.
D
Position 
Use lower slots along
oven walls. insert
rack using a rack-up
position.
Position 
Use lower slots along
oven walls. insert rack
using a rack-down
position.
7