Hkoenig rp4 Manual De Instrucciones página 2

ENGLISH
Thank you for your purchase of our electric BBQ grill. To use this BBQ properly and safely,
please read the following instructions carefully.
PREPARATION BEFORE USE
1. Take apart the grill plate, small pans and/or granite grill plate, clean with a soft damp cloth.
Place your appliance on the level and stable surface.
2. Check that the voltage marked on the product corresponds with your supply voltage. Ensure
the controller is in the "O" position before plug in.
OPERATION
1. Connect the BBQ to the power supply. Turn the switch from "O" TO "一 " position and the
indicator light is on for working, then pre-heating the BBQ set for 5 minutes.
2. As the different heat of cooking request, put your food on the small pans and place them
under the heating sources. Or place your food directly on the grill plate for the purpose of
grilling.
3. When you have finished using the BBQ, turn the switch to "O" position and unplug it from
the socket. Wait until the appliance is completely cool down before moving or cleaning.
MAINTENANCE & CARE
1. Make sure the plug is removed from the power supply
socket. After the BBQ grill set is completely cooled
down, clean it with the mild cleaner or gel-like cleaner
by using soft cloth. PLEASED DO NOT CLEAN THE
SET WHEN IT IS STILL HOT.
2. DO NOT USE hard brushes, scratchy materials and/or
alcohol, petrol or any organic cleaner for the cleaning
purpose
3. Except the removable grill plate, do not immerse the
main body in water to clean.
4. Put the BBQ grill set on the cool place right after the
cleaning.