ADE BA 1601 Instrucciones De Operación página 27

The measured values will then be shown to you repeatedly on the display.
The arrow on the display indicates which indicators or values are being shown.
Indicator Meaning
1. Fat Your body fat proportion in % with simultaneous evaluation
indicator:
2. Water Your body water in %
3. Muscle Your muscle mass in %
4. Bone Your bone mass in kg
5. Your body weight in the set unit of measurement
View stored values
After an analysis has been performed, you can display the values of your last
measurements at any time.
1. Turn on the scale using SET.
2. Using or , select your user slot.
The data from the last measurement will be displayed, one value after another.
"0.0" will then be shown on the display and you can weigh yourself. Otherwise the
scale switches off after a few seconds.
Weighing tips
‚ Weighing for the body analysis can only be carried out barefoot. In doing so, your
feet should only be lightly moistened. Completely dry feet can lead to false results,
as the electrical conductivity will be poor then.
‚ During the measuring process, stand still and do not hold on to anything.
‚ Do not weigh yourself directly after unusual physical exertion.
‚ Do not weigh yourself immediately after standing up. Wait approximately fifteen
minutes. In this time, the water is able to distribute through your body.
‚ Always attempt to weigh yourself at the same time, in order to obtain comparable
values.
Body Analyser Scale BA 1601
V. High = obese
High = too much body fat
Normal = normal body fat proportion
Low = too little body fat
Body analysis
27