Publicidad
Idiomas disponibles
Idiomas disponibles
HANDLE INSTALLATION
Position the handle over the holes in the cart and attach with the M6 x 12 hex bolts
provided. Tighten securely.
RAISE AND RELEASE
DRAWER FRONTS
These units are equipped with raise and release drawer fronts. To open, lift up on the
drawer front while pulling towards you. To close, shut the drawer firmly until the latch
engages.
If the drawer does not stay closed, the hook may be bent, or it may be rubbing against the
drawer slides. To fix this problem, lightly bend the hook until the drawer will engage in the
slide.
8
Publicidad
