Publicidad
Idiomas disponibles
Idiomas disponibles
DRAWER REMOVAL
Pull the drawer out so that it's almost fully extended. Push up on the release lever on one
side, while pushing down on the release lever on the other side. While holding the levers
in these positions, pull the drawer outward until it is released from the drawer slide.
ONE SIDE – PUSH UP
OTHER SIDE – PUSH DOWN
DRAWER REPLACEMENT
Extend the drawer slides from the unit. Insert the brackets on each side of the drawer
into the slots in the slides, being careful that they are properly positioned. Once properly
inserted, completely close the drawer to set the slides in position.
MAINTENANCE
Periodically clean the drawer fronts, drawer trim, and other surfaces with mild detergent
and water.
Lubricate the casters with high quality bearing grease (annually/yearly).
Lubricate the slides (twice a year) with a product like WD40 or other quality lubricant.
This is especially true as the temperature decreases, which can cause the bearing to
become stiff.
Grease and oil can be removed with most standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
9
Publicidad
