Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Spindle
2
Spindle nut
3
Pushing cup
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool set is designed for removing and installing the rear axle mounting bushes on Ford Fiesta IV
and Ka (1996 onwards) and can be used directly on vehicle, without removing the rear trailing link.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Store the tool in a dry place that is not accessible for children.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Stellen Sie sicher, dass der Arbeitsbereich gut ausgeleuchtet ist.
•
Halten Sie die Werkzeuge in einem guten und sauberen Zustand.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Rear Trailing Arm Bush Tool
for Ford Fiesta IV and Ka
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
4
Receiving cup
5
Mounting cup
6
Force nut
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8846
Publicidad
