DCU Tecnologic Senior Manual De Instrucciones página 25

ENG
Must bind your device first: Input the [Reg Code]
Bind your device: Newly registered account after login, you
will be prompted to bind the device, otherwise, you cannot
enter the main interface of the app.
Note:
(1) The Registration QR code(Reg Code) is on the smartwatch
QR code menu.
Please note only after the sim card is inserted, and after the
watch is connected to the internet while APN is set, you will
see there is QR code on the watch.
If the device is not connected to the internet correctly,
there will be no QR code available yet, in this case, please
set the APN by SMS at first (refer to the APN setting in this
manual)
(2) When the registration is on the Apple mobile phone; there
is no successful registration interface, only the message of
"registration successful" is prompted.
When the device is successfully bound, you can start the
device function. If you want the APP to bind more devices,
please see section 4). otherwise, you can skip it.
25