MPM MRK-12 Manual De Instrucciones página 24

EN
MIXING
Remove the blender container B1 from the processing unit A by turning it clockwise. Then
place there the mixer jug G2 and turn it counterclockwise until the clasps snap in place.
Place the ingredients to be mixed into the jug.
ATTENTION! Do not fill the jug with hot liquids. Do not pour more than 1 l of liquids into the
mixer jug.
Recommended speed: adjust the speed of the mixer to the recipe or your own needs.
WHIPPING EGG WHITES
Put the egg whipper head I1, together with the whipper end I2, on the blender container
B1 on the driving shaft A1 and close with the blender lid B2. Twist it counterclockwise
until the clasps snap closed.
Use the egg whipper only to make foam from egg whites. When trying to use the whipper
to mix even the most delicate of dough, it may result in damaging the whipper head I1 and
repair costs will not be covered by the warranty.
Recommended speed: best use speed setting 3.
SHREDDING AND GRATING
Attach the disc holder C7 to the blender bowl B1 on the driving shaft A1. Place one of
the metal discs C1/2-C6 on the disc holder, depending on the products which will be
processed and what effect you want to achieve. Next, place the lid B2 and turn it coun-
terclockwise, until the clasps snap shut.
ATTENTION! Use only the blender pusher B3 to hold down and push the processed products.
Recommended speed: depending on the disc, use speed setting 2 or 3. The PULSE func-
tion A7 may also be used.
JUICE EXTRACTOR
Attach the juice extractor container H4 with the filter H3 in the blender container B1 on
the driving shaft A1. Next, place the juice extractor lid H2 and turn it counterclockwise,
until the clasps snap shut. Feed the fruit you want to juice through the opening in the lid
and push or hold them down only with the pusher H1.
Recommended speed: for highest juicing efficiency use speed setting 3, because at these
setting of the speed controller the centrifugal force in the container is greatest and can
transfer the juice extracted in the juice extractor container to the container of the blender.
CITRUS SQUEEZING
Place the squeezer container D2 in the blender container B1 and turn it counterclockwise,
until the clasps snap shut. Next, place the squeezer head D1 in the opening in the squeez-
er container to attach it to the driving shaft A1. Cut each citrus fruit you want to squeeze
into halves and place each half with the pulp facing the squeezer head.
Recommended speed: set the speed controller to the setting 1.
ATTENTION! The blender container can maximally contain 1.5 litre of juice.
24