Technical data
Fuel requirements
General motor tool safety warnings
Safety warnings for water pumps
Parts
Assembly
Installation
Oil and fuel
Start up
Maintenance
Troubleshooting
Authorized Service Centers
Warranty policy
Use and care recommendations
FILL THE PUMP completely with water before starting (purging).
DO NOT TURN ON THE PUMP WITHOUT OIL, ,
otherwise the motor may throw a rod.
USE UNLEADED FUEL with a PON octane rating equal to or greater than 86
or RON equal to or greater than 91. NEVER USE CONTAMINATED FUEL,
decomposed and/or with gasoline-oil mixture.
Place the pump on a FIRM, LEVEL SURFACE.
Perform periodic MAINTENANCE on your machine (Page 11).
2
ENGLISH
Contents
3
3
To gain the best performance of
the tool, prolong the duty life,
4
make the Warranty valid if
necessary, and to avoid hazards
5
of fatal injuries please read and
understand this Manual before
6
7
Keep this manual for future references.
8
The illustrations in this manual are for reference
9
only. They might be different from the real tool.
10
11
12
13
14
CAUTION
using the tool.