THERMEx THO1BFPY 60 Instrucciones página 91

M 905211020227032023 THERMEX THO1BFPY 91
3. set alarm
In standby mode, press " " twice to enter alarm setting mode. At this time, the alarm icon for the watch
will flash.
Set the time by pressing "+" and " —" (0:00~23:59~0:00).
Note: A long press on "+ / —" will incrementally adjust the clock by 5 min at a time. Short press on "+ / —"
will adjust by 1 min.
After setting the clock/system time, wait 10 seconds to automatically confirm the selected time.
when setting hours and minutes, the values for minutes and hours flash; when the clock setting is com-
pleted, if not " " within 10 seconds to confirm, the system will default to complete the clock setting and
exit the clock setting.
4. set the cooking time
In standby mode, press " " three times to enter cooking time setting mode. At this point, the cooking time
icon for the clock will flash. Settings for the desired roasting program and temperature must be set before
the roasting time. when the cooking time is selected, the oven cooks for the desired time.
Set the time by pressing "+" and " —" (0:00~23:59~0:00).
Note: A long press on "+ / —" will incrementally adjust the clock by 5 min at a time. Short press on "+ / —"
will adjust by 1 min.
After setting the clock/system time, wait 10 seconds to automatically confirm the selected time.
when setting hours and minutes, the values for minutes and hours flash; when the clock setting is com-
pleted, if not " " within 10 seconds to confirm, the system will default to complete the clock setting and
exit the clock setting.
5. set delayed start
In standby mode, press " " four times to activate delay start setting mode. At this point, the delayed start
icon for the watch will flash. Settings for the desired roasting program, temperature and roasting time
must be set before the delayed start is set.
Set the time by pressing "+" and " —" (0:00~23:59~0:00).
Note: A long press on "+ / —" will incrementally adjust the clock by 5 min at a time. Short press on "+ / —"
will adjust by 1 min.
After setting the clock/system time, wait 10 seconds to automatically confirm the selected time.
when setting hours and minutes, the values for minutes and hours flash; when the clock setting is com-
pleted, if not " " within 10 seconds to confirm, the system will default to complete the clock setting and
exit the clock setting.