Worx WX333 Manual De Instrucciones página 8

moving parts, breakage of parts and
any other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean . Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control .
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5. SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
HAMMER SAFETY WARNINGS
1. Wear ear protectors. Exposure to noise can
cause hearing loss.
2. Use auxiliary handles, If supplied with the
tool. Loss of control can cause personal
8
injury.
3. Hold power tools by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
'live' wire may make exposed metal parts of the
power tool 'live' and could give the operator an
electric shock.
ADDITIONAL SAFETY RULES
FOR HAMMER
1. Always wear a dust mask.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Rotary hammer
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
COMPONENT LIST
1. LOCKING SLEEVE
2. DEPTH GAUGE
3. GREASE BOX COVER
4. ON/OFF SWITCH
HAMMER OR DRILLING ACTION SELECTOR
5.
SWITCH
HAMMER OR CHISEL ACTION SELECTOR
6.
SWITCH
7. VARIABLE SPEED CONTROL
8. SDS DRILL BITS*
9. SPANNER
10. KEY CHUCK WITH ADAPTOR, CHUCK KEY*
11. PLASTIC CONTAINER GREASE*
12. DUST COVER*
13. CHISELS (POINT & FLAT)*
14. AUXILIARY HANDLE
* Not all the accessories illustrated or described
are included in standard delivery.
EN