HiBoost Hi17-5S-Plus Manual De Usuario página 13

Step 2. Install Indoor Antenna
Select indoor panel antenna or Omni-ceiling antenna as an indoor antenna according to your
needs to provide indoor coverage.
Install the indoor panel antenna as shown on the graph below.
If you have an indoor Omni ceiling antenna, the best place to install it is the center of your
house. Install Omni ceiling antenna as shown in the graph below.
NOTE: the required distance between the indoor and outdoor antennas is 10-15 m.
Step 3. Install Signal Booster
 Select the location near a power supply on a wall
Mount the booster with the screws included into the kit as shown on the graph below.
 Connect the outdoor antenna cable to booster connector marked as "outdoor". Tighten the
connection by hand or with a wrench.

Connect the indoor antenna cables to booster connector marked as "indoor". Tighten the
connection by hand or with a wrench.

Connect AC power cord to the signal booster, then connect the plug to the electrical outlet
to power on the booster. Note: the required booster mounting distance above the floor is
1-1,8 m.
If it's necessary to install multiple indoor antennas solutions, please contact us. We will provide
you with a professional installation coverage plan.
１２