HiBoost Hi17-5S-Plus Manual De Usuario página 15

Red
OFF
More about "NET" legend indication
NET indicates the connection establishment between booster and Bluetooth/Wi-Fi, if the connection
established well, NET LED will show Green UP status, otherwise light would be blinking or off.
LCD Status
Green Light up
NET
status
No light
Troubleshooting
Problem
The signal booster has no power.
The booster's power is on but the phone is not
connected to the network and still cannot
communicate with the signal.
Good downlink signal with poor communication quality.
The booster sub-band auto shuts
off for protection due to severe
loop back or self-oscillation
(ALC≥42dB,ISO≥42dB)
The booster not power up
Meaning
Mobile is connected to booster
through Bluetooth/Wi-Fi
Mobile is not connect to
booster through
Bluetooth/Wi-Fi
Solution
Check that the AC outlet is working.
Try to fasten the connections between the different
parts of the system.
Change the direction of donor antenna or its installation
position.
Check whether there's interference.
Consult the operator whether the signal source base
station works well.
１４
Sub-band interface. Please check
the Troubleshooting section to get a
solution if coverage is not good.
Not working properly. Please
check the Troubleshooting section
to get a solution.
Solution Methods
Working properly.
Not working properly, please
contact with Huaptec EU for
assistance.