Descargar Imprimir esta página

A-iPower AP10000E Guía Rápida De Inicio página 12

Ocultar thumbs Ver también para AP10000E:

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROL PANEL FEATURES
1
2
1. Engine Control Switch: Flip the switch to the
"ON (l)" position and pull the recoil starter to
start the generator. Turn to the "OFF (O)"
position to turn off the generator.
2. Low Oil Indicator: The Light will be illuminated
when the engine oil level is low. Add oil.
3. Hour Meter: Displays and records how many
hours your generator has run (up to 9,999.9).
4.12V DC,Outlet (Automotive): Provides 12 volt DC
power up to 8.3 amps.
5. Circuit Breaker(DC): Protects the generator
against electrical overloads.
6. Main Circuit Breaker: The maincircuit breaker
controls total output ofall outlets to protect the
generator from overload or short circuit.
NOTE: Total power drawn from all outlets must not exceed the nameplate rating.
3
4
5
6
7
8
9
7. Circuit Breaker(AC): Protects the generator
against electrical overloads.
8. Ground Terminal: The ground terminal is used to
ground the generator.
9. 120V AC, 20A Duplex, Single Phase, 60 Hz
Outlets (NEMA 5-20R): Each outlet is capable of
carrying a maximum of 20 Amp on a single outlet
or a combination of both outlets.
10. 120V AC, 30A Twist Lock outlet, single phase,
60 Hz Outlet (NEMA L5-30R): This receptacle
can provide 120 volt output up to 30 amps.
11. 120/240V AC, 30A Twist Lock, Single Phase,
60 Hz Outlet (NEMA L14-30R): This outlet can
supply either 120 Volt or 240 Volt output.
Page 10
7
7
9
10
7
7
1 1

Publicidad

loading