BE QUIET! STRAIGHT POWER 10 500W CM Manual Del Usuario página 5

1. INTRODUCTION
We are delighted that you have chosen to use a be quiet! power supply from our Straight Power 10 series in your
PC. Please read and follow all the information contained in these instructions carefully prior to installation.
Should you have any further question, please contact our customer service. See contact information in item
Manufacturer's details�
2. SAFETY INSTRUCTIONS
The power supply is only guaranteed to function properly if the instructions are followed.
Caution: Only use the supplied cable set. Using cables that were not included (e.g. cables of older power
supply unit series) may lead to defects!
Never open the power supply case. The electronic components inside the case generate a high voltage that is
dangerous to humans. Even after disconnecting the power supply from the network, some parts still have high
voltages. For this reason, a power supply adapter should only be opened by an authorised technician.
Opening the device voids your warranty.
∙ Never handle the power supply with wet or damp hands when in operation.
∙ Never insert objects into the power supply's apertures/fans.
∙ Note that the power supply is designed for use indoors in conditions without high levels of moisture in the
ambient air. Using the power supply outdoors will lead to serious damage.
∙ Never work on the power supply while it is connected to the mains. In this case, always set the power switch
to "0" and / or disconnect the power plug.
∙ In the event of a short circuit in the device, unplug the mains cable and do not use the device.
Make sure that your PC is not located directly next to a heating system or any other source of heat.
Make sure that your computer case is sufficiently ventilated by means of additional fans; with today's complex
and powerful systems a power supply is incapable of dissipating the heat produced in the PC case without
additional support.
If you want to clean your power supply, disconnect it completely from the mains and never use a damp cloth or
cleaning agent. Clean the power supply from the outside using a dry cloth.
Before using the power supply, allow it to warm up to room temperature for one hour to prevent condensation
accumulating in the power supply.
3. BENEFITS AND TECHNICAL ADVANTAGES OF YOUR NEW POWER SUPPLY
Virtually inaudible operation
Virtually inaudible and airflow-optimized operation thanks to a 135mm SilentWings ® 3 fan with improved fan
frame. Minimization of mechanical and electrical noise due to a smooth 6-pole fan motor and fluid-dynamic
bearing with copper core. Extremely long lifespan of up to 300,000 hours.
World-class efficient and power-saving operation
80PLUS ® Gold certification for efficiency up to 93%. ErP 2014
ready. Power consumption in stand-by mode <0.25W. Fulfills the
requirements of the Energy Star 6.0 environmental and energy-
saving guidelines.
Very high power conversion, performance and stability
Four independent 12V-rails. Active clamp and synchronous rectifier (SR) technology produces very stable
operation. DC-DC conversion for the 3.3V and 5V-rails for even better stability and tighter voltage regulation.
High-quality 105°C-rated capacitors ensure performance and reliability.
Convenient usage and excellent compatibility
User-friendly modular cable management reduces clutter and improves cooling airflow. Sleeved cables of up
to 115cm. All-in-one cable with S-ATA, HDD and FDD connectors.
Efficiency of the Power Supply »
95
90
85
87
80
75
70
20
Loading (% of rated output power)
90
87
50 80 100
5