Filter And Wash Arm Maintenance; Annual Maintenance - SciCan HYDRIM M2 G4 Manual Del Operador

7. Care and Maintenance (cont.)

7.5 Filter and Wash Arm Maintenance

Filter

7.6 Annual Maintenance

If the message "Maintenance needed" appears, the annual maintenance is required.
To continue using the HYDRIM, press OK. Call for service as soon as possible. The
annual maintenance should be done after 365 days have elapsed since the initial
installation or the last service call was performed.
Filter Maintenance:
Inspect the filter in the bottom of the
chamber daily for debris and clean if
necessary. To clean, remove the filter, rinse
under a tap and replace. Ensure that the
filter is firmly locked into position when
replaced.
Wash arms
Wash Arm Maintenance:
If the wash arms are not turning easily,
remove them, rinse under a tap and
reassemble. To remove the upper arm,
unscrew the collar counterclockwise. To
remove the middle or lower arm, unscrew
the collar clockwise.
36