MRA 4025066174966 Instrucciones De Montaje página 5

GB
MONTAGEANLEITUNG
DL 800 V-Strom 2023-
Mounting the windscreen on the motorcycle
Place the motorcycle on a flat surface.
1.
Remove the original windscreen.
2.
Mount the retaining plates supplied onto the motorcycle using the M5 x 16 mm fillister head
3.
screws
[10554] and the plastic washers [10635] (P1 and P2).
Plug the rubber nuts [10629] into the retaining plates and attach the MRA windscreen to the
4.
motorcycle with the original socket screws (P3).
Align the windscreen and tighten all screws.
5.
Check all screws for tightness after installation and subsequently at regular intervals, and
retighten if necessary. Clean the windscreen using a sponge, water and neutral soap.
Solvents, alcohol and petrol will damage the windscreen.
MRA-Klement GmbH
Siemensstr. 6 · D-79331 Teningen
Phone +49 7663 9389 - 0 · info@mra.de 5