Publicidad
Idiomas disponibles
Idiomas disponibles
Fan Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
COMPONENTS:
1. Carry handle
2. Fan blades
3. Front grill
4. Speed control switch
5. Power cord
Remove all packing material and accessories before use. Make sure all the accessories are inclu-
ded, if any item is damaged or missing, contact your dealer.
OPERATION
1. Ensure the fan is turned off before plugging into the mains socket. Place the fan on a level and
dry surface.
2. Only connect the fan to a suitable AC 220-240V~50Hz mains socket.
3. The fan has two speeds. Turn the Speed Control Switch to your desired speed. There are 3 set-
tings – O (off), I (low) and II (high).
4. Turn the Speed Control Switch to "O" position and unplug the fan after use.
8
Publicidad
