Dirt Devil BiBox DD 2630 Manual De Instrucciones página 12

2 Use
2.1 Assemble appliance and adjust nozzles to surface
2 Use
1
click!
6
WARNING:
Risk of injury! Only attach the appliance parts when the appliance is not
connected to the power supply. Otherwise the machine might start up
and parts of your body, hair or pieces of clothing might be sucked in.
CAUTION:
Before assembling, make sure that the fitted nozzle suits the surface to
be cleaned. Never use a brush with rotating bristles for example to
clean floors or objects that may not be able to withstand the treatment
without damage. Observe the flooring manufacturer's recommendations
and care information.
NOTE:
You might have to twist the parts when connecting them so they are
securely in place.
2.2 How to vacuum
11
WARNING:
Risk of injury! Check appliance and power cord before each use. A
damaged appliance must never be used.
CAUTION:
Only use the appliance with all filters undamaged, in dry condition and
correctly fitted. Make sure that no objects obstruct the telescopic tube,
the suction hose or other openings.
1. Pull the cable out of the appliance (Fig. 11).
WARNING:
Danger of electric shock! If the red marking is visible (Fig. 12), retract the
cord by pressing the cord retraction button ( ) to pull in the cord up to the
yellow mark (Fig. 13). Otherwise, the power cord may be damaged.
12
3
2
7
8
12
4
optional
option
optioneel
opcional
opzionale
opsiyonel
optional
option
optioneel
opcional
opzionale
opsiyonel
9
1. Connect suction hose and appliance (Fig. 1).
2. Insert the accessory included in the scope of delivery onto the handle
(Fig. 2 - 10) depending on what type of surface you want to vacuum:
- Furniture brush (Fig. 2) for objects with a sensitive surface
- Upholstery nozzle (Fig. 3) for upholstery, mattresses and the like
- Crevice nozzle (Fig. 3) or optional long flexible crevice nozzle (Fig. 4)
for crevices in upholstery
- Optional mini turbo brush (Fig. 5) for non-sensitive upholstery,
runner, mats, and the like
- Floor nozzle with switch position as in Fig. 7 for carpets
- Floor nozzle with switch position as in Fig. 8 for hard floors
- Optional hard floor nozzle (Fig. 10) for hard floors with crevices
3. Ensure that the bypass vent is closed (Fig. 6).
4. If you use the telescopic tube, adjust its length.
13
2. Insert the plug into a mains socket.
3. Switch on the appliance using the on/off switch ( ) (Fig. 14).
NOTE:
The auxiliary air regulator (Fig. 6) must be completely closed for vacuum
cleaning. With the auxiliary air regulator you can quickly reduce the suction
power, to release objects (such as curtains) that have been sucked in.
If the hard floor nozzle (Fig. 10) has become stuck to the floor, you can
reduce the suction power just as easily using the bypass vent (Fig. 6).
4. Vacuum dust (Fig. 15).
WARNING:
Risk of injury! Especially when vacuum-cleaning stairs make sure that
you always stand on a higher level than the appliance.
5
optional
option
optioneel
opcional
opzionale
opsiyonel
optional
option
optioneel
opcional
opzionale
opsiyonel
10
14 15