Publicidad
FEATURES AND USE
ADJUSTABLE TEMPERATURE DIAL
Your refrigerator will automatically maintain the
temperature level you select. The temperature
control dial has 7 settings plus OFF. 1 is the
warmest. 7 is the coldest. Turning the dial to OFF
stops cooling in both the refrigeration and freezer
sections. At first, set the dial to 4 and allow 24
hours to pass before adjusting the temperature to
your needs.
To adjust the temperature range in the cold
setting, turn the temperature dial in a clockwise
direction. For normal operating conditions, keep
the dial halfway between cold and coldest. For
your convenience, the factory presets the control
at normal operating conditions.
NOTE: If the refrigerator has been placed in a
horizontal or tilted position for any period of time
wait 24 hours before plugging the unit in.
FREEZER SECTION
Your freezer compartment is equipped with
adjustable airflow control. For your convenience,
airflow is preset by the factory to the colder
setting. There is also an option to adjust the
settings, either to cold or to coldest.
REFRIGERATOR SECTION
INTERIOR LIGHT
Your refrigerator is equipped with an interior light
in the fresh food section for you to easily locate
your food.
Your refrigerator may be equipped with a slide
control to raise or lower the humidity levels or your
crispers. This feature will increase the storage
life of your fruits and vegetables. Simply adjust
the controls to the appropriate setting for items
you are storing in the crispers. Low settings
allow moist air to exit the crisper, for optimum
storage of fruit and/or vegetables that have skins.
High settings retains moist air in the crisper, for
optimum storage of leafy fresh vegetables.
FROST- FREE REFRIGERATOR-FREEZER
You should never need to defrost your freezer, as
it automatically defrosts any ice build-up that may
occur.
REFRIGERATOR INTERIOR SHELVES
(Shelves may vary by model)
The shelves of your refrigerator were designed
with you in mind. Their varied adjustability allows
you to satisfy your personal storage needs.
To remove or adjust a full-width slide-out shelf:
(see fig. 5)
1. Gently tilt the shelf up and slide forward until the
shelf has been completely removed.
2. To replace the shelf, select the desired setting
and gently slide the shelf back until it rests in the
locking position.
Fig. 5
PAGE 10 • SET UP & USE
Publicidad
