Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO MODE
Setting the scantime
Press the MENU button 8.
➮
➮
Keep pressing the fi or % button
7 until "SCAN TIME" appears in
the display.
➮
Set the required scantime using
the @ or # buttons 7.
When you have finished making your
changes,
press the MENU button 8 twice.
➮
Note:
The set scantime also applies to
●
scanning in CD/MP3 and CD
changer mode.
Setting the display
You can choose to continuous display
one of the followings:
Time
●
Frequency
●
button 6 pressed
➮
Keep the
until the required display appears.
CD mode
You can use this unit to play standard
CDs, CD-Rs and CD-RWs with a
diameter of either 5 or 3 inches.
Beside playing CDs containing audio
data, CDs containing MP3 files can also
be played on this device.
Descriptions of the "MP3 mode" can be
found after this chapter.
Risk of damage to the CD
drive! Contoured CDs (shape CDs)
are not suitable for playback in this
unit.
We accept no liability for any damage
to the CD drive or CD that may occur
as a result of the use of unsuitable
CDs.
Switching to CD mode
If there is no CD inserted in the
●
drive and the unit is playing Radio
or CD Changer (AUX) mode,
button 1.
➮
press the
The release panel opens.
➮
Gently insert CD with the printed
side uppermost into the drive until
you feel some resistance.
The CD is drawn into the drive
automatically.
You must not hinder or assist the drive
as it draws in the CD.
➮
Gently close the control panel
whilst exerting a little pressure until
you feel it clicks into place.
CD playback begins.
CD MODE
13
Publicidad
