Dacor DTT48 960 Serie Instrucciones De Instalación página 22

Installation Instructions
Connecting the Gas Supply, cont.
Never install an old connector on a new appliance. For hard piping, carefully align the pipe; the rangetop can-not
be moved after the connection is made.
To prevent gas leaks, apply pipe-joint compound or wrap pipe-thread tape with Teflon on all male (external) pipe
threads.
1. Attach the provided gas-pressure regulator to the rangetop pipe nipple inlet. (For tight installations,
the regulator may be installed upstream from the nipple, anywhere between the shut-off valve and the
rangetop. For best performance, minimize gas-pressure loss by attaching the regulator as close as possible to
the gas inlet.
2. Complete the connection by installing a flexible gas line between the pressure regulator and the shut-off
valve.
Flexible Connector Hookup
Installer: Inform the consumer of the location of the gas shut-off valve.
Gas Shut-Off Valve
Adapter
Adapter
22 English
INSTALL_TOP_DTT48T960_DG68-01476A-00_EN+MES+CFR.indb 22 INSTALL_TOP_DTT48T960_DG68-01476A-00_EN+MES+CFR.indb 22
0.5-in or 0.75-in
Gas Pipe
Tubing Line
to Cooktop
Flex
Control
Connector
Manifold
(6-ft max.)
Pressure
Regulator
Match the direction
NOTE
The gas shut-off valve should be installed on the gas
piping, away from the rangetop, easily accessible for
quick opening/closing.
NOTE
When connecting the pressure regulator, pay
attention to the direction of the pressure regulator.
(If it is connected in reverse, the pressure regulator
may shut off the gas.)
2022-11-24 오후 2:03:03 2022-11-24 오후 2:03:03