LD Systems WSECO2 Manual De Usuario página 33

BODYPACK TRANSMITTER
Modulation:
Frequency range:
Channels:
Input:
Frequency response:
RF output power:
Controls:
Indicators:
Power supply:
Operating time:
Operating temperature range:
Relative humidity range in operation:
Dimensions (W x H x D):
Weight (without batteries):
Accessories included:
MICROPHONE
Microphone type:
Capsule:
Polar pattern:
Frequency response:
Connector:
Accessories included:
Features:
MICROPHONE
Microphone type:
Capsule:
Polar pattern:
Frequency response:
Connector:
Accessories included:
Features:
MICROPHONE
Microphone type:
Capsule:
Polar pattern:
Frequency response:
Connector:
Accessories included:
Features:
GUITAR CABLE
Connector 1:
Connector 2:
Lenght:
LDWSECO2BP
FM
863.1 MHz (WSECO2BP1)
863.9 MHz (WSECO2BP2)
864.5 MHz (WSECO2BP3)
864.9 MHz (WSECO2BP4)
630.2 MHz + 638.7 MHz (WSECO2BPB6I)
633.4 MHz + 650.2 MHz (WSECO2BPB6II)
1
3-pin mini-XLR
60 - 16.000 Hz
10 mW
On / Standby / Off, triple gain switch
battery low
2 x AA batteries
up to 10 h (depending on batteries)
-10°C ... 45°C
25% ... 85%
65 x 85 x 23 mm
0,1 kg
2 x AA battery
LDWS100MH1
headset
back-electret condenser
cardioid
20 - 20.000 Hz
3-pin mini-XLR
foam windscreen
-
LDHSAE1
headset
back-electret condenser
bi-directional
80 - 16.000 Hz
3-pin mini-XLR
foam windscreen
water-repellent
LDWS1000MW
wind instrument microphone
back-electret condenser
cardioid
50 - 18.000 Hz
3-pin mini-XLR
foam windscreen
-
LDWS100GC
3-pin mini-XLR
6.3 mm jack
1.5 m
LDWS100MH3
headset
back-electret condenser
cardioid
70 - 16.000 Hz
3-pin mini-XLR
foam windscreen
-
LDWS100ML
lavalier microphone
back-electret condenser
cardioid
20 - 20.000 Hz
3-pin mini-XLR
foam windscreen
-
LDHSM1
headset
back-electret condenser
noise cancelling
70 - 16.000 Hz
3-pin mini-XLR
foam windscreen
water-repellent
33