Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TECHNISCHE DATEN
Description
Value
of the parameter
of the parameter
MOTOR-
MOTORCYCLE
CYCLE
Name of the product
STAND
STAND
( REAR )
( FRONT )
MSW-
MSW-
MSW-
Model
MPS-01
MPS-02
MPS-03
Dimensions [Width x
470x690
550x780
550x780
Depth x Height; mm]
x345
x410
x360
Weight [kg]
4,2
4
4,3
Maximum
permissible
200
motorcycle weight
[kg]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
EXPLANATION OF SYMBOLS
Please read the instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation
(general warning sign).
CAUTION! Danger of crushing your hand!!
CAUTION! Hanging weight!
CAUTION! The figures in this manual are illustrative
only and may vary in some details from the actual
appearance of the product.
2. USAGE SAFETY
ATTENTION!
Read
all
safety
warnings
instructions. Failure to follow warnings and
instructions could result in serious injury or even
death.
6
U S E R M A N U A L
The term "unit" or "product" in the warnings and in the
description of the instructions refers to the MOTORCYCLE
STAND.
a)
Keep the work area tidy and well lit. Disorder or poor
lighting can lead to accidents. Be foresighted, watch
what you are doing and use common sense when
using the unit.
b)
If you have any doubts as to whether the unit is
working properly or if it is damaged, contact the
manufacturer's service department.
c)
Only the manufacturer's service department can repair
the unit. Do not carry out repairs yourself!
d)
No children or unauthorized persons are allowed in
the work area. (Inattention may result in loss of control
of the unit.)
e)
Keep these instructions for use for future reference.
If the unit is to be passed on to a third party, the
operating instructions must also be handed over
together with the unit.
f)
Keep the packaging and small assembly parts out of
the reach of children.
g)
Keep the unit away from children and animals.
h)
When using this unit together with other units, also
follow the other instructions for use.
and
i)
Do not operate this unit if you are tired, ill or under the
influence of alcohol, drugs or medication that could
impair your ability to operate the unit.
j)
The unit is not intended to be used by persons
(including children) with reduced mental, sensory or
intellectual functions or persons who lack experience
and/or knowledge unless they are supervised or have
been instructed by a person responsible for their
safety on how to operate the unit.
k)
Use caution and common sense when operating this
unit. A moment's inattention during operation may
result in serious personal injury.
l)
Do not overestimate your capabilities. Maintain body
balance and equilibrium at all times during operation.
This allows for better control of the machine in
unexpected situations.
m)
The unit is not a toy. Children should be watched to
ensure that they do not play with the unit.
n)
Keep unused equipment out of the reach of children
and out of the reach of anyone unfamiliar with the unit
or this instruction manual. These units is dangerous in
the hands of inexperienced users.
o)
Keep the unit out of the reach of children.
p)
To ensure the designed operational integrity of the
unit, do not remove factory-installed covers or loosen
screws.
q)
When transporting or moving the unit from storage to
the place of use, observe the health and safety rules
for manual handling applicable in the country where
the unit is used.
r)
Do not move, shift, or rotate the unit while in
and
operation.
s)
Do not tamper with the unit to alter its performance or
design.
t)
Keep the unit away from sources of fire and heat.
u)
Do not overload the unit.
v)
Use the unit only on a flat and level surface that is
suitable for the current load.
w)
Do not use the unit outdoors during strong winds.
Rev. 18.10.2022
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The product is designed to keep the motorcycle in an
upright position, slightly raised above the pavement.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DESCRIPTION
C1
C2
D
B
A
C3
A.
Transport wheels
B.
Frame
C.
Motorcycle Support Adapters
D.
Transport and Shuttle Brackets
3.2. PREPARATION FOR OPERATION
POSITIONING OF THE UNIT
Keep the unit away from any hot surfaces. Always operate
the unit on a level, stable, clean, fireproof and dry surface
and out of the reach of children and persons of impaired
mental, sensory and intellectual functions.
ASSEMBLY OF THE UNIT
MSW-MPS-01: Fit the castors using M10 screws, washers and
self-locking nuts in the bushings on the rounded corners of
the "A" shaped profiles. Then slide two corner profiles "A"
of the same size into the main frame (with carrying handle)
until the holes in both are aligned, i.e. with the so-called
through hole. Insert M8 screws into these holes and tighten
them with washers and nuts at their ends. Attach the spring-
loaded forks to the ends of the stand intended for the front
fork and secure their ends using a clamp.
MSW-MPS-02/ MSW-MPS-03: in the sleeves on the rounded
corners of the "A" (or "V" in the case of MSW-MPS-03)
shaped profiles, fix the wheels using M10 bolts, washers and
self-dimming nuts. Then slide two corner profiles "A" of the
same size into the main frame (with carrying handle) until
the holes in both are aligned, i.e. with the so-called through
hole. Insert M8 screws into these holes and tighten them
with washers and nuts at their ends. Slide the adapters into
the holes at the ends of the stand, adjust their distance and
lock them in position using the knobs.
Rev. 18.10.2022
EN
3.3. WORKING WITH THE UNIT
Drive the stand under the motorcycle wheel, making sure
that it is centrally located inside the unit, i.e. between the
frame racks. MSW-MPS-02/MSW-MPS-03: in case of the rear
wheel, fit adapters under e.g. the swingarm (see the second
photo below), or swingarm sheaves (so-called "sliders" or
"paddocks" - see the last photo below). Lay the stand flush
with the ground to lift the motorcycle. MSW-MPS-01: For the
front wheel, place the spring fork under the bottom of the
fork (first photo below).
3.4. CLEANING AND MAINTENANCE
a)
Use only non-corrosive cleaning agents for cleaning
the surfaces.
b)
Store the unit in a dry and cool place protected from
moisture and direct sunlight.
c)
Do not spray the unit with a stream of water or
immerse it in water.
d)
Perform regular inspections of the unit checking
technical fitness and any damages.
e)
Use a soft cloth for cleaning.
f)
Do not use sharp and/or metal objects (e.g. a wire
brush or metal spatula) for cleaning, as these may
damage the surface of the material from which the
unit is made.
7
Publicidad
