Descargar Imprimir esta página

GreenWorks WLG908 Manual Del Operador página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Children should be supervised to ensure that they
do not play with the product.
• Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
• To reduce the risk of electrical shock, do not put the
cord or battery in water or other liquids. Do not place
or store the product where it can fall or be pulled
into a tub or sink.
• All metal parts are free from burrs or sharp edges
which could damage conductor insulation.
• To reduce the risk of injury, close supervision is
necessary when a product is used near children.
• The lens gets very hot during use. To reduce the risk
of burns, do not contact hot parts.
• Do not modify or attempt to repair the product or the
battery pack (as applicable) except as indicated in
the instructions for use and care.
2.3
ELECTRICAL SAFETY
• To disconnect, turn all controls off, then remove the
plug from the outlet.
• Unplug from the outlet when not in use and before
servicing or cleaning.
• Do not operate any product with a damaged cord
or plug, or after the product malfunctions or is
dropped or damaged in any manner. Return the
product to the nearest authorized service facility
for examination, repair, or electrical or mechanical
adjustment.
• Don't Abuse Cord – Never carry the product by the
cord or yank it to disconnect from the receptacle.
Keep the cord away from heat, oil, and sharp edges.
• Disconnect the product from the power supply when
not in use, before servicing, when changing bulbs
(lamp), cleaning, and similar actions.
• Do not insert foreign objects into this product.
• Be sure to use an extension cord that has the
capacity to handle the current the work light will
draw. An undersized cord will cause a drop in
line voltage, resulting in overheating and loss of
power. Use the chart to determine the minimum
wire size required in an extension cord. Only round
jacketed cords listed by Underwriter's Laboratories
(UL) should be used.
2.4
PRODUCT USE AND CARE
• If operating a product in a damp location is
unavoidable, then the product should only be
connected to a circuit that is protected by a ground-
fault circuit-interrupter (GFCI). Use of a GFCI
reduces the risk of electric shock.
• Keep out of reach of children.
• Avoid direct eye exposure. Do not direct the light
beam at persons or animals and do not stare into
English
the light beam yourself (not even from a distance).
The product can cause flash blindness.
2.5
BATTERY TOOL USE AND CARE
• Disconnect the battery pack from the product before
making any adjustments, changing accessories, or
storing power tools, etc.
• Recharge only with the battery charger specified by
the manufacturer. A battery charger that is suitable
for one type of battery pack may create a risk of fire
when used with another battery pack.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
• Do not use a battery pack or product that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or product to fire
or excessive temperature. Exposure to fire or
temperature above 265°F (130°C) may cause an
explosion.
• Follow all charging instructions and do not charge
the battery pack or product outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
• Recharge only with the battery charger specified by
the manufacturer. A battery charger that is suitable
for one type of battery pack may create a risk of fire
when used with another battery pack.
• Use only with specifically designated battery packs.
Use of any other battery packs may create a risk of
injury and fire.
3
ASSEMBLY
This section describes how to assemble and adjust the
product.
Read and understand the safety chapter and the
assembly instructions before you assemble the
product.
5
WARNING
EN

Publicidad

loading