Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3.1
REPLACE THE LIGHT HEAD
This product is equipped with 2 light heads to choose
from. Follow the steps below to replace the light head.
1.
Push and hold the lock button.
2.
Turn the light head counterclockwise.
3.
Remove the light head.
4.
Insert the new light head into the light with the
holes aligned.
5.
Press and turn the light head. You will hear hear a
click when the light head locks into position.
English
4
OPERATION
This section describes how to operate the product.
Read and understand the safety chapter and
operation instructions before you operate the
product.
4.1
BEFORE YOU USE THE PRODUCT
4.1.1
CONNECT THE BATTERY CHARGER
1.
Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2.
Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.2
CHARGE THE BATTERY
Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.3
BATTERY INFORMATION
Refer to the operator's manual of the battery for
information about how to use the battery.
4.1.4
ADJUST THE LIGHT ANGLE
The included light heads can be set in a variety of
positions. To adjust lighting angle, adjust the light head
to desired position.
6
WARNING
Publicidad
