SPORTNOW A90-325V00 Manual De Instrucciones página 29

Attach the front stabiliser (2) to the main body (1) with carriage bolts (16), flat washers (17)
and cover nuts (18) using an open wrench (25). Note: the move wheels of the front stabilis-
er (2) are forward, as shown.
Similarly, attach the rear stabiliser (3) to the main body (1) with carriage bolts (16), flat
washers (17) and cover nuts (18) using an open wrench (25).
Attention: The foot adjusters on the rear stabiliser (3) can adjust the machine to the ground
smoothly. The moving wheels on both sides of the front stabiliser (2) can move the machine
for a short distance.
STEP 2
25#
Install the right pedal (12) with an 'R' mark on the main body (1) using an open wrench (25).
Note: tighten clockwise.
Similarly, Install the left pedal (13) with an 'L' mark on the main body (1) using an open
wrench (25). Note: tighten anticlockwise.
Install the adjusting knobs (14) to the front and back of the main body(1). Tightening is not
needed.