STEP 3
Insert the saddle post (4) into the main body (1). Pull out the adjusting knob (14), so it
automatically inserts into the corresponding hole of the saddle post (4).
Similarly, insert the handle post (5) into the main body (1). Pull out the adjusting knob (14),
so it automatically inserts into the corresponding hole of the handle post (5).
Note: Pull out the adjusting knob (14) and change the height of the saddle (4) or handle
(5) post. After adjusing, ensure the knobs (14) are tightened.
STEP 4
x1
x1
25
29