Astera LEO Fresnel Manual Del Usuario página 5

• Explosion
• Fire development
• Heat generation or smoke and gas development
• Do not look directly into the light.
• It can cause harm to your eyes.
• Do not look at the LEDs with a magnifying glass or any other optical
instrument that may concentrate the light output.
• Use only Astera approved accessories to diffuse or modify the light
beam.
• Do not open the product housing.
• Do not apply power if the light is damaged.
• Do not submerge the light into any liquid.
• Do not replace the LED light source.
• Caution, risk of electric shock.
The LeoFresnel shall be installed near a socket-outlet which must be
easily accessible.
Warning: risk of electric shock - Do not open device.
• The exterior surfaces of the light can become hot, up to 70°C (158°F)
during normal operation.
• Ensure that accidental physical contact with the device is impossible.
• Install only in ventilated locations.
• Do not cover the light.
• Allow all lights to cool before touching.
• Keep 0.3 m (12") from objects to be illuminated.
SECONDARY SAFETY MOUNTING
The LeoFresnel must always be secured by a safety
wire when used in a hanging position.
If the primary suspension fails, the device must not
fall more than 20cm.
CLEANING AND MAINTAINING
Caution: Liquids entering the housing of the device can cause a short
circuit and damage the electronics. Do not use any cleaning agents or
solvents. Only clean using a soft damp cloth.
~ 5 ~