Astera LEO Fresnel Manual Del Usuario página 9

Connect light as BTB
Please note: This ONLY works for Astera lights with built-in Bluetooth.
Please power on the light. Hold down the
power button for 3 seconds until the light
flashes blue. In the AsteraApp press
„Manage Bluetooth Bridges", then "+" and
follow instructions on screen to connect.
The light which is connected as BTB
shows a small Bluetooth icon in the
display.
1. LeoFresnel
1s
6. Pair with lights
Once the AsteraApp is connected to a
BluetoothBridge, you can pair your lights with
the app:
Please power on the light(s). Then hold down
the power button for 3 seconds until the lights
flash blue. Go to "Pair with Lights" dialog in the
AsteraApp. Then press OK.
7. Linking to a CRMX transmitter
The LeoFresnel can be controlled via Wireless DMX/ CRMX. To do this, it must first
be connected to a CRMX transmitter. There are two different methods to do this:
either the connection is established by pressing a button on the transmitter or a
linking key is set that matches the transmitter.
Linking via push button
3s 5s
2. AsteraApp
1x 3x
Leo 0001000
Tap to pair
1. LeoFresnel
1s
2.4 GHz
~ 9 ~
3. AsteraApp
5x 1x 6x
Leo 0001000
3s 5s
3x 7x 5x
2. AsteraApp
1x 3x
Pair with Lights