Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOUR SAW
READ THIS
INSTRUCTION
MANUAL
AND SAFETY
RULES
BEFORE
OPERATING
YOUR
CHAIN
SAW. Compare
the illustrations
with your unit to familiarize
yourself
with the location
of
the various
controls
and adjustments.
Save this manual
for future reference.
Chain
Adjustment
Tool
Front Hand Guard
Front Handle
(BarTool)
r_
__/
Starter
Rope
Chain
Muffler
-___.[_
__
Primer
Housing
Fuel Mix Fill Cap
Cylinder
Cover
Throttle
Chain
Rear Lockout
Direction
of Travel
Handle
Throttle
Choke/
Chain
Chain
Trigger
Fast Idle
Brake
Catcher
Lever
ON/STOP
SWITCH
The ON/STOP
SWITCH
is used to stop the
engine.
THROTTLE
TRIGGER
The THROTTLE
TRIGGER
controls engine
speed.
THROTTLE
LOCKOUT
The THROTTLE
LOCKOUT
must be pressed
before you can squeeze
the throttle trigger.
This feature
prevents
you from accidentally
squeezing
the trigger.
CHOKE/FAST
IDLE
LEVER
The choke and fast idle are set by pulling the
CHOKE/FAST
IDLE LEVER out to the full ex-
tent for cold starting
or after refueling. The
choke provides
additional
fuel to the engine
during cold starting.
PRIMER
BULB
The PRIMER
BULB
circulates
fuel to the
carburetor
to provide
quicker starting.
Chain
Brake Nuts
Guide Bar
CHAIN
BRAKE
The CHAIN
BRAKE
is a device designed
to
stop the chain if kickback
occurs.
The chain
brake activates
automatically
in the event of
kickback.
The chain brake activates
manu-
ally if the front hand guard is pushed forward.
The chain brake is disengaged
by pulling the
front hand guard back toward the front han-
dle as far as possible.
CHAIN
TENSION
it is normal for a new chain to stretch during first
15 minutes of operation.
You should
check
your
chain
tension
frequently.
See
CHAIN
TENSION
under the ASSEMBLY
section.
_L, WARNING:
Muffler is very hot dur-
ing and after use. Do not touch the muffler or
allow
combustible
material
such
as
dry
grass or fuel to do so.
Publicidad
