Remington Ceramic Slim 210 Manual Del Usuario página 6

ENGLISH
WIRING INSTRucTIoNS uK Plugs only
This product is fitted with a BS1363 plug fused at
disconnected and an appropriate plug fitted as detailed below. If it is necessary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at
a qualified electrician.
The wires in the mains lead are coloured in accordance with following code:
BlUE - NEUTRAl
BRoWN - lIVE
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BlUE must be connected to the terminal which is marked
'N' or coloured BlACK. The wire which is coloured BRoWN must be connected to the
terminal which is marked 'l' or coloured RED. Never connect either of the wires to the big
EARTH terminal marked 'E' or coloured GREEN or GREEN AND YElloW.
SERVIcE ANd WARRANTY
This product has been checked and is free of defects. We warrant this product against any
defects that are due to faulty material or workmanship for the warranty period from the
original date of consumer purchase. If the product should become defective within the
warranty period, we will repair any such defect or elect to replace the product or any part
of it without charge provided there is proof of purchase.
This does not mean an extension of the warranty period.
In the case of a warranty simply call the Remington
This warranty is offered over and above your normal statutory rights.
The warranty shall apply in all countries in which our product was sold via an authorised
dealer.
This warranty does not include damage to the product by accident or misuse, abuse,
alteration to the product or use inconsistent with the technical and/or safety instructions
required. This warranty shall not apply if the product has been dismantled or repaired by a
person not authorised by us.
For further information on recycling see www.remington-europe.com
4
5 A. If the plug is unsuitable, it should be
5 A. If in doubt consult
® Service Center in your region.