Publicidad
Idiomas disponibles
Idiomas disponibles
•
Complete control without the need to use the control panel.
•
More accurate setpoint temperatures to be set (half a degree by half a degree between 15 and
30 ºC e.g. 19.5 ºC).
•
24 hours a day, 7 days a week personalised programming or by using one of the 4 pre-installed
programmes on the BASIC Control remote.
To learn more about Rointe remote controls and their functions, go to our web portal or consult their
user manual.
IMPORTANT: When the product is programmed using a Rointe remote control, LED
number 7 (corresponding to MAX POWER mode) will flash.
WARNING: If the towel rail is automatically programmed and you wish to use it again
in manual mode, you must hold down the on/off button for 3 seconds (with the product
unlocked). The product will no longer be programmed and you will be able to control it
manually using the buttons on the control panel.
3.8. Troubleshooting
During normal operation of the towel rail, any malfunctions can be indicated by the LED indicators on
the product. See table below to identify the error codes:
Indicator
LED 6
flashing
4. Maintenance & Cleaning
The product does not require any type of maintenance. We recommend that all parts of the product
are kept clean (behind, underneath, upper fins, etc.). Do not use any abrasive product on the steel
main body. Clean it with a damp cloth and a pH neutral soap, and the control panel with a dry cloth.
Code
Led 1: OFF
Led 2: OFF
Led 3: OFF
Temperature sensor
Led 4: OFF
failure due to short-
Led 5: OFF
circuit or open sensor.
Led 6: flashing
Led 7: OFF
Error
Please contact the
Rointe Technical Support
department by calling our
support team.
CIRCE OVAL
EN
Solution
11
Publicidad
