Rointe OVAL 482 Manual De Instalacion Y Uso página 9

Iindicator
Led 1: ON
Led 2: ON
2 LED
Led 3: OFF
Led 4: OFF
Led 5: OFF
Led 6: OFF
Led 1: ON
Led 2: ON
4 LED
Led 3: ON
Led 4: ON
Led 5: OFF
Led 6: OFF
Led 1: ON
Led 2: ON
6 LED
Led 3: ON
Led 4: ON
Led 5: ON
Led 6: ON
3.4. Consumption identification
The last temperature indicator LED will flash to indicate the heating element is active and the product
is consuming energy.
3.5. Keypad lock
By pressing the and
If any key is pressed while the panel is locked, all the LEDs will flash twice.
For safety reasons, the on/off button
product on or off when the panel locked, press and hold the button
3.6. MAX POWER mode
The MAX POWER mode activates the towel rail heating element to maximum power continuously
regardless of the sensor reading. To activate this function from the control panel, press the button
. You can also activate this mode, even when the product is switched off.
Pressing once will activate this mode for 15 minutes. If you press (X) again within the next two
seconds, the next period (30 minutes) will be activated. Consecutive presses will activate the
following periods as shown in the table below:
LED Temperature
18ºC
24ºC
30ºC
keys together for 3 seconds, you can lock/unlock the control panel keypad.
will respond even if the panel is locked. To switch the
Iindicator LED
Led 1: ON
Led 2: ON
3 LED
Led 3: ON
Led 4: OFF
Led 5: OFF
Led 6: OFF
Led 1: ON
Led 2: ON
5 LED
Led 3: ON
Led 4: ON
Led 5: ON
Led 6: OFF
for 3 seconds.
CIRCE OVAL EN
Temperature
21ºC
27ºC
9