Wiesenfield WIE-CCD-100 Manual De Instrucciones página 28

a - Controller
b - 7x M4 x 12 self-tapping screws
c - 4x M4 knobs
d - 6V battery terminals
Note: a screwdriver (not included) is a tool for assemblying the unit.
Place of installation:
• The door should be mounted on the outer wall of the poultry house (the
controller has a light sensor).
The ambient temperature should not fall below -18 ° C.
•
Assembly
1) The recommended size of the entrance to the poultry house is 39.3 x
25.4 cm (height x width).