Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Excessive vibrations or
makes noise.
Does not drain and/ or spin.
50
English
Untitled-4 50
Untitled-4 50
• Make sure the washer is installed on a level, solid floor
that is not slippery. If the floor is not level, use the
leveling feet to adjust the height of the washer.
• Make sure the shipping bolts are removed.
• Make sure the washer is not contacting any other
object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or metal-decorated clothes can cause noise
while being washed. This is normal.
• Metal objects such as coins can cause noise. After
washing, remove these objects from the drum or filter
case.
• Remove the filling of the pillows and cushions, and
wash only the covers.
• Make sure the drain hose is neither kinked nor
obstructed all the way to the drain system. If there is a
drain restriction, call for service.
• Make sure the drain filter is not clogged.
• Close the door and press or tap Start/Pause (Hold to
Start) . For your safety, the washer will not tumble or
spin unless the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain
system that is not clogged.
• If the washer is not supplied with sufficient power,
the washer temporarily will not drain or spin. As soon
as the washer regains sufficient power, it will operate
normally.
• Make sure the drain hose is inserted 6 to 8 inches
inside the drain pipe.
• Make sure the washer is level.
Action
2023-06-22
2023-06-22
3:30:10
3:30:10
Publicidad
