Publicidad
Idiomas disponibles
Idiomas disponibles
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
Never dry trimmer or shaving foil head
with a towel, brush or tissue, as this may
cause damage.
1 Turn off the product.
2 Remove any trimming guard from the
product.
3 Rinse the back shaving attachment and
product handle under warm water and
wipe dry with a dry cloth.
4 Remove the shaving foil head by pulling it
off the product (Fig. 11).
- Hold the shaving foil head by the plastic
housing only.
5 Rinse the shaving foil head with warm
running tap water (Fig. 12).
6 Allow the shaving foil head to air dry
completely.
- Never dry trimmer or shaving foil head with
a towel, brush or tissue, as this may cause
damage.
7 Rinse the hair chamber under warm
running tap water to remove any residual
debris (Fig. 13).
8 Reattach the shaving foil head by snapping
it back onto the product (Fig. 14). You will
hear a click.
Storage
- Be sure the product is switched off. Remove
the power cord from power outlet and the
product before storing it in a safe, dry
location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord and other accessories in a safe
location where these will not be cut or
damaged.
- Do not place or store the product where it
can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Accessories
Replacement parts may be purchased on our
website www.philips.com/store. For
maximum product performance, replace
shaving foil head once a year.
- Model BG2000 Philips Norelco
Replacement Shaving Foil Head.
Replacement
Replacing the shaving foil head
For maximum shaving performance, we advise
you to replace the shaving foil head and
cutters every year (Fig. 15). If shaving head foil
and cutters are worn or damaged, do not use
the product and replace immediately. Always
replace the shaving foil head and cutters with
original Philips Norelco shaving foil head
accessories.
1 Switch off the product and disconnect it
from the wall outlet.
2 Remove the shaving foil head by pulling it
off the product (Fig. 11).
Note: The foil is a precision part. Handle with
care.
3 Place the new shaving foil head on the
product by snapping it into place (Fig. 14). You
will hear a click.
4 After replacing the shaving foil head, check
that the shaving head is firmly attached before
using product.
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.
Online information is available 24 hours a day,
7 days a week.
Disposal
- This product contains a rechargeable
lithium-ion battery which must be disposed
of properly (Fig. 16).
- Contact your local town or city officials for
battery disposal information. You can also call
1-800-822-8837 or visit
www.call2recycle.org for battery drop-off
locations.
Publicidad
