WINE CELLAR FEATURES & USE
Plug in the wine cellar to power the unit on.
You can set the temperature of your wine cellar at any setting you desire. The
temperature will range from 46˚ to 64˚. When initially turned on, the LED will
show the ambient. The LED will then display the internal temperature.
NOTE: The wine cellar control panel has an auto-lock feature to prevent children
from changing the temperature. The temperature control will automatically
lock after 60 seconds. To unlock the temperature control, press the ( )
and ( ) at the same time until you hear a beep.
NOTE: White wine temperature is cooler than red wine temperature.
By pressing the ( ) temperature button on the display you can increase the
temperature and pressing the ( ) temperature button will lower the temperature.
Your wine cellar also has a light for your viewing pleasure. A light switch on the
control panel will activate the cabinet light and front door LEDs manually. Under
normal operation it is best for the light to remain off.
Please note that the actual cabinet temperature in a thermoelectric unit is
dependent on the ambient temperature. You may set the cabinet temperature
within range but the unit may not reach the preset temperature.
Press the Fº/Cº button to toggle between Celsius and Fahrenheit temperature
readings.
For this model, when the ambient temperature is 77°, the lowest temperature
that can be reached is 50-52°. When ambient temperature is 73°, the cabinet
temperature can reach approximately 46-48º.
NOTE: The display temperature is from 46º-64º. When the cooler is installed,
if the ambient temperature is higher than 64º or lower than 46º, the display
will show "-" until the cabinet has cooled down to 64º or warmed up to 46º.
When the wine cooler is started, the temperature display will show the ambient
temperature.
When the ambient temperature is below the pre-set temperature, the cellar will
not operate until the ambient temperature increase to higher than the pre-set
temperature.
English
6