en
20 | DCU 220 | Product description
Heed the following:
R
The access point should be located as centrally and
high up as possible, ideally under the ceiling. The
access point must not be installed behind a metallic
object, such as a radiator, for example, or in a metal
switching cabinet.
R
If only one access point is present, the antenna
should face downwards towards the floor. If an
access point has multiple antennae, they should be
aligned three-dimensionally.
R
The highest and best transfer rates are achieved
when there is visual contact between DCU 220 and
the access point.
R
In the event of a poor connection it may be useful to
change the channel set on the access point. Where
possible avoid employing channels adjacent to those
already in use.
R
It is advisable to configure radio communication en-
coding at the access point.
2.5.3
Bluetooth restrictions
Bluetooth provides a radio link on the free 2.4 GHz ISM
band (ISM: Industrial, Scientific, Medical). This frequen-
cy range is not subject to state legislation and can be
used without a license in most countries. Consequently
a large number of applications and devices employ this
frequency band for transmission.
2.5.4
WLAN restrictions
Canadian Compliance Statement
i
Complies with the Canadian ICES-003 Class A spec-
ifications.
i
This device complies with RSS 210 of Industry Can-
ada. This Class A device meets all the requirements
of the Canadian interference-causing equipment
regulations.
|
1 689 989 221
2014-11-26
3.
Product description
3.1
Intended use
The DCU 220 is a portable, location-independent laptop
and tablet computer (convertible) for the workshop.
Win 7 is pre-installed as operating system. Upon initial
start-up of additional components the information in
the relevant instructions must be observed and the cor-
responding application software installed.
!
The installation of additional software on the DCU 220
may impair the performance of the DCU 220 system
and the DCU 220 may become slower in general. This
applies in particular to virus scanner programs.
!
The DCU 220 is a precision device which is not to be
subjected to sources of heat (e.g. direct sunlight), im-
pact, vibration, magnetic fields and excessive soiling.
!
You will find the "END-USER LICENSE AGREEMENT
(EULA) FOR MICROSOFT SOFTWARE" (EULA.XPS)
on the Desktop. Please observe the notes contained
herein.
3.2
Scope of delivery
Designation
DCU 220 with carrying handle
Storage batteries (2x)
External DVD drive
USB connecting cable (Y)
Case
Power supply unit
German power supply cable
Stylus with string
Original operating instructions
3.3
Special accessories
Information on special accessories such as vehicle-spe-
cific connecting cables and other measuring and con-
necting cables can be obtained from your Bosch autho-
rized dealer.
3.4
Transportation
The DCU 220 connecting cables must be removed for
transportation purposes. In addition, the DCU 220 is
only to be transported and stored in the case supplied.
Order number
–
1 687 335 047
1 687 023 745
1 684 465 685
1 685 438 656
1 687 023 746
1 684 461 186
1 683 083 009
1 689 989 221
Robert Bosch GmbH